Volume coefficientΣΟ
Συντελεστής όγκου · ΣΟ
Last updated
The number that, multiplied by the area of the plot, gives the maximum volume of the building above the final ground level. It is often confused with the building coefficient, which concerns floor area and not volume.
What it means in practice
The volume coefficient (συντελεστής όγκου, ΣΟ) limits the size of a building in three dimensions. While the building coefficient measures square metres of floors, the ΣΟ measures cubic metres of volume above the final ground level. It is therefore affected by the height of the floors too, not only by their area.
The ΣΟ is set by the building terms and is checked together with the building coefficient, site coverage and the maximum permitted height. A building must respect all of these limits at once.
How it is calculated
The maximum volume allowed above the final ground level is the area of the plot times the volume coefficient. The volume of the building is calculated from the drawings of the design, with the counting rules set by the provisions in force.
Maximum volume = Plot area × ΣΟ
- Plot area
- 500 m²
- Volume coefficient (illustrative)
- 3
- Maximum volume above the final ground level
- 1,500 m³
What is not counted
The volume below the final ground level stays out, since the ΣΟ concerns only the volume above it. The law also excludes certain structures, each with its own conditions and limits. The exact list is checked against the provisions in force.
Common mistakes
- Confusing the ΣΟ with the building coefficient.
- Checking only the building coefficient, without checking the volume, in designs with tall floors.
- Calculating the volume from the natural ground level instead of the final ground level.
Difference from the building coefficient
The building coefficient gives the maximum total floor area, in square metres. The volume coefficient gives the maximum volume of the building above the final ground level, in cubic metres. A building with tall floors can respect the building coefficient and exceed the volume coefficient.
Questions
What is the difference between the volume coefficient and the building coefficient?
The building coefficient limits the total floor area, in square metres. The volume coefficient limits the volume of the building above the final ground level, in cubic metres.
Where do I find the volume coefficient for a plot?
Whether a volume coefficient applies and what its value is follow from the building terms of the location and the provisions in force. The competent Building Service (ΥΔΟΜ) can certify them for you.
Does the basement count towards the volume coefficient?
The volume coefficient concerns the volume above the final ground level, so whatever lies below it stays out. How a basement that partly projects above it counts is checked against the provisions in force.
Ask about your own property
Ask using the address or the ΚΑΕΚ (Cadastre property code) and get the article with its ΦΕΚ (Government Gazette issue).
An information tool, not legal advice. Professional responsibility remains with the engineer.