Building coefficient (floor area ratio)ΣΔ
Συντελεστής δόμησης · ΣΔ
Last updated
The number that, multiplied by the area of the plot, gives the maximum total floor area that may be built. It is often confused with site coverage, which concerns only the building's footprint on the plot.
In Domicode Location and 3D
What it means in practice
The building coefficient (συντελεστής δόμησης, ΣΔ) states how many square metres of building may be built on a plot in total, adding up all the floors. It does not say how many floors the building will have or where it will stand: those are set by the other building terms, such as the maximum permitted height, site coverage and the building placement system.
The ΣΔ is not the same everywhere. It is set for each area by the building terms that apply there, which is why the first check for any property is which terms apply at that particular location.
How it is calculated
The maximum total floor area that may be built is the area of the plot times the building coefficient of the area. The sum includes the floor areas that count under the law; those that are excluded stay out of it.
Maximum total floor area = Plot area × ΣΔ
- Plot area
- 500 m²
- Building coefficient (illustrative)
- 0.8
- Maximum total floor area
- 400 m²
What is not counted
The law excludes certain spaces from the building coefficient, each with its own conditions and limits. They usually include spaces such as the pilotis (πιλοτή), semi-open spaces and certain ancillary spaces. The exact list, the limits and the conditions follow from the provisions in force and are checked case by case.
Common mistakes
- Confusing the ΣΔ with site coverage.
- Applying the general ΣΔ of an area without checking for special terms or amendments at that particular location.
- Counting spaces that are excluded, or leaving out spaces that count.
Difference from site coverage
The building coefficient concerns the total area of all the floors. Site coverage concerns only the part of the plot that the building covers in plan. A building can respect site coverage and exceed the ΣΔ, or the other way round, which is why both are always checked.
Questions
What is the difference between the building coefficient and site coverage?
The building coefficient sets how many square metres may be built in total, across all floors. Site coverage sets how much of the plot the building may cover in plan.
Where do I find the building coefficient for a plot?
In the building terms that apply at the plot's location, as they follow from the approved town plan and the acts that accompany it. The competent Building Service (ΥΔΟΜ) can certify them for you.
Do all the spaces of a building count towards the building coefficient?
No. The law excludes certain spaces, each with its own conditions and limits, which are checked against the provisions in force.
Related guides
Ask about your own property
Ask using the address or the ΚΑΕΚ (Cadastre property code) and get the article with its ΦΕΚ (Government Gazette issue).
An information tool, not legal advice. Professional responsibility remains with the engineer.