Site coverage
Κάλυψη
Last updated
The area of the plot covered by the horizontal projection of the buildings. Its maximum percentage is set by the building terms of the area. It is often confused with the building coefficient, which concerns the total area of all the floors.
In Domicode Location and 3D
What it means in practice
Site coverage (κάλυψη) shows how much of the plot the building takes up, as seen from above, in plan. It measures the building’s footprint on the plot, not its floors: a single-storey building and a multi-storey building with the same footprint have the same site coverage.
The maximum coverage percentage is not the same everywhere. It is set by the building terms of the area, which is why it is checked for each plot separately. The part of the plot that is not covered stays open.
How it is calculated
The maximum area that may be covered is the area of the plot times the maximum coverage percentage of the area. The coverage of a building is the area of its horizontal projection, leaving out the structures that are excluded under the law. The calculation is shown on the site coverage plan of the permit.
Maximum site coverage = Plot area × Coverage percentage
- Plot area
- 500 m²
- Coverage percentage (illustrative)
- 60%
- Maximum site coverage
- 300 m²
What is not counted
The law excludes certain structures from site coverage, each with its own conditions and limits. They usually include open projections, such as balconies, and certain structures in the open space of the plot. The exact list and the conditions follow from the provisions in force and are checked case by case.
Common mistakes
- Confusing site coverage with the building coefficient.
- Calculating coverage from the total floor area instead of the building’s horizontal projection.
- Applying the general percentage of an area without checking for special terms at that particular location.
- Leaving out structures that count, or counting structures that are excluded.
Difference from the building coefficient
Site coverage concerns only the part of the plot that the building covers in plan. The building coefficient concerns the total area of all the floors. A building can respect site coverage and exceed the building coefficient, or the other way round, which is why both are always checked.
Questions
What is the difference between site coverage and the building coefficient?
Site coverage sets how much of the plot the building may cover in plan. The building coefficient sets how many square metres may be built in total, across all floors.
Where do I find the coverage percentage for a plot?
In the building terms that apply at the plot's location. The competent Building Service (ΥΔΟΜ) can certify them for you.
Do balconies count towards site coverage?
The law excludes certain structures from site coverage, each with its own conditions and limits. Whether a balcony counts depends on its form and is checked against the provisions in force.
Related guides
Ask about your own property
Ask using the address or the ΚΑΕΚ (Cadastre property code) and get the article with its ΦΕΚ (Government Gazette issue).
An information tool, not legal advice. Professional responsibility remains with the engineer.