Continuous building system
Συνεχές σύστημα δόμησης
Last updated
A building placement system where the building adjoins the side boundaries of the plot. It is often confused with the detached system, where the building stands clear of all the boundaries of the plot.
What it means in practice
In the continuous building system (συνεχές σύστημα δόμησης), the building is built in contact with the side boundaries of the plot. When the same system applies on the neighbouring plots, the buildings join one another and form a single frontage towards the street, as often happens in town centres.
This system uses the full width of the plot, since it leaves no gaps at the side boundaries. The open space of the plot usually remains at its rear, while towards the street the position of the building is set by the building line. The boundary distance Δ is kept from the boundaries the building does not adjoin.
Whether the continuous system applies to a plot follows from the building terms of the area. Whether and when a departure from it is allowed is set by the provisions in force.
Common mistakes
- Applying the continuous system because the neighbouring buildings are in contact, without checking the building terms of the location.
- Leaving out the boundary distance Δ from the boundaries the building does not adjoin.
- Confusing the continuous system with site coverage: the system sets the position of the building, not how much of the plot may be covered.
Difference from the detached system
In the continuous system, the building adjoins the side boundaries of the plot. In the detached system, it stands clear of all the boundaries: it keeps the minimum distance Δ from neighbouring properties, while towards the street its position is set by the building line. Which system applies is set by the building terms of the area.
Questions
What does the continuous building system mean?
That the building is built in contact with the side boundaries of the plot, so that it forms a continuous frontage with the neighbouring buildings.
Must the building always adjoin the side boundaries?
Whether and when the building may stand clear of them, and what distance it must then keep, is set by the provisions in force and is checked for each plot.
Ask about your own property
Ask using the address or the ΚΑΕΚ (Cadastre property code) and get the article with its ΦΕΚ (Government Gazette issue).
An information tool, not legal advice. Professional responsibility remains with the engineer.