Through plot
Διαμπερές οικόπεδο
Last updated
A plot with frontage on two public common spaces that do not meet, usually on opposite sides. It is often confused with the corner plot, where the public common spaces meet.
What it means in practice
A through plot extends from one public common space to the other, usually crossing the whole depth of a narrow city block. It has two frontages, on public common spaces that do not meet, and towards each of them the street line and building line set by the plan apply.
Because it has no rear boundary in the usual sense, the design of the building and the check of the distances differ from those of a plot with a single frontage. The way depth is measured for the minimum plot requirements, and how the distances from the boundaries apply, follow from the provisions in force.
The two public common spaces may differ, for example in width, in level or in the lines the plan sets. That is why each frontage is checked separately.
Common mistakes
- Treating one side as a rear boundary when it is frontage on a public common space.
- Assuming that the lines and terms are the same on both frontages.
- Confusing it with the corner plot, where the public common spaces meet.
Difference from the corner plot
Both have frontage on more than one public common space. On a through plot the public common spaces do not meet and usually lie on opposite sides. On a corner plot the public common spaces meet, at the corner. The distinction matters for the way the minimum plot requirements and the distances are checked.
Questions
Does a through plot have a rear boundary?
It has no rear boundary in the usual sense, since it has frontage on both sides. How the distances and the depth are treated follows from the provisions in force.
Do the same terms apply on both frontages of a through plot?
You should not take it for granted. The lines and terms towards each public common space are checked separately in the approved town plan.
Ask about your own property
Ask using the address or the ΚΑΕΚ (Cadastre property code) and get the article with its ΦΕΚ (Government Gazette issue).
An information tool, not legal advice. Professional responsibility remains with the engineer.